This article serves as an in-depth guide, acting as a user manual to help you understand, set up, and master the features of the Aodelan WTR2 1. Product Overview and Key Features

To set up a basic time-lapse, follow these steps on the transmitter:

The Aodelan WTR-2 is a versatile camera accessory designed for time-lapse photography, long exposures, and wireless shutter control. It functions as both a wireless timer remote control and a wired intervalometer system. This guide provides comprehensive instructions to help you set up and master your device. 📦 What is Included in the Box

Time gap between shots. Note: Set this longer than the LONG time.

Navigates the settings menu and adjusts numeric values.

A: The receiver operates on 12/24V DC only. For 110V AC, you must use an intermediate relay or power supply.

Typically uses AAA batteries (both transmitter and receiver). 3. Getting Started: Setup Instructions Step 1: Install Batteries

Duration of the shutter open time for Bulb mode (0s to 99h 59m 59s).

I can provide custom settings tailored exactly to your gear configuration. Share public link

Press and hold the button on the transmitter until the channel number flashes. Use the arrow keys to select a channel (01 to 99).

Plug the other end of the cable into your camera’s remote control terminal. Turn on the camera, receiver, and transmitter. Smart Channel Pairing

: Most settings can be adjusted with 0.1-second accuracy .

Ensure the shutter link cable is pushed completely into both the receiver jack and the camera body terminal. Clean dirt or pocket lint out of the ports. The specific cable connector type you are using