Ats-20 Radio Manual Online

Go to product viewer dialog for this item. (and updated ATS-20+) is a compact, full-band DSP radio receiver powered by the SI4732 chip. It supports FM, AM, LW, and SW (with SSB capability). 🛠️ Quick Start & Controls Toggle the physical switch on the rear/side.

Switches between radio bands (FM, AM, MW, LW, SW) or toggles modulation modes.

Identify your device's COM port in your computer's Device Manager. ats-20 radio manual

Select Arduino Uno or Nano (matching your hardware). Program: Choose the firmware file and flash the device.

Power off the radio, wait 5 seconds, and flip the switch back on. This resets the microcontroller. Go to product viewer dialog for this item

Settings are automatically saved to EEPROM when exiting the menu. 4. Advanced Features (Firmware Dependent)

Press the button or click the encoder knob to lower the step size to 1 kHz or 0.1 kHz (100 Hz). 🛠️ Quick Start & Controls Toggle the physical

:

Type-C USB port for charging the internal lithium battery and flashing firmware. Control Buttons

The ATS-20 radio manual typically covers various aspects of the radio's operation, features, and specifications. Here are some key points that are often included: