Ensure that power is disconnected from the circuit before installation. Only qualified personnel should install this device.
Connect CT secondary terminals to Meter Terminals 1 and 3. Connect Voltage Phase A to Terminal 2.
: Features self-checks and tamper/wiring detection that can trigger SMS alerts, LED indicators, or emergency dial-outs. User Resources & Manuals edmi mk6n genius user manual
The EDMI Mk6N goes beyond basic energy counting, acting as an advanced power quality analyzer. Load Profile (Interval Data)
The Mk6N Genius is designed for smart grid integration. Its communication options are highly flexible: Ensure that power is disconnected from the circuit
A frequently underutilized feature in the user manual is data export.
Usually two buttons (Select and Reset/Scroll) allow you to cycle through the display menus. Connect Voltage Phase A to Terminal 2
The meter includes self-checks for wiring faults. 3. Communication Capabilities
Mount the meter vertically on a flat, vibration-free surface using three secure fixing screws.
Installation must only be performed by qualified personnel. Ensure all upstream and downstream isolation switches are open and locked out before attempting installation. Mounting the Meter
| Specification Category | Key Details | | :--- | :--- | | | 57V - 240V (Phase to Neutral); Burden <10VA per phase | | Current | CT Range: 1/1.2A to 5/20A; WC Range: 10/100A to 25/100A (Class 1 only); Burden <0.5VA per phase | | Accuracy Class | 0.5S, Class 1, Class 2 (IEC 62053-22/21/23) | | Frequency | 45Hz - 65Hz | | Display | 16 Characters x 2 Lines Alphanumeric LCD | | Real-time Clock | Accuracy of 0.5 seconds per day; mains-synchronized or internal crystal backup | | Battery Backup | Optional lithium battery (3.5V, 1200mAh) provides 2 years of data retention without power | | Communication | Optical Port (ANSI C12.18/IEC 62056-21), RS232, RS485, Modbus RTU | | Physical Size | 292.5mm (L) x 175mm (W) x 94mm (D) |