Eppendorf 5402 Manual Updated ^hot^ «2025-2026»
Use the "momentary" button for brief cycles where digital time setting is not required . Maintenance & Troubleshooting Tips Common Error Codes:
Understanding the limits of your equipment prevents motor burnout and ensures user safety. The Eppendorf 5402 balances a compact benchtop footprint with robust cooling and speed capabilities. 14,000 RPM (Rotations Per Minute) Maximum RCF: 16,000 × g (Relative Centrifugal Force) Temperature Range: -9°C to +40°C
Cools down to -4°C and can maintain stable temperature control up to +40°C.
Insert the emergency release tool (or a small screwdriver) into the opening to manually trip the mechanical latch. 6. Service and Calibration Updates eppendorf 5402 manual updated
to prevent imbalance. Ensure tubes are capped tightly and have a density no higher than 1.2 g/mL. Fast Cooling:
Keep the lid open when the centrifuge is not in use to prevent mold and condensation build-up. Monthly Maintenance
Centrifuge safety cannot be overstated. An unbalanced rotor spinning at 14,000 RPM carries immense kinetic energy and can destroy the machine or cause severe injury. Use the "momentary" button for brief cycles where
May indicate a converter/brake malfunction or improper rotor installation . Safety Precautions:
What are you experiencing with your unit?
Ensure your specific rotor (typically the F-45-18-11 standard fixed-angle rotor) does not show signs of chemical corrosion, deep scratches, or stress fractures. 14,000 RPM (Rotations Per Minute) Maximum RCF: 16,000
Ensure the rotor nut or lid is securely tightened counterclockwise (or clockwise depending on the specific rotor thread) before closing the main centrifuge lid. Step 3: Setting Parameters
Automated lid lock, imbalance detection, and robust steel chassis. 2. Updated Operating Instructions
Features digital displays for simultaneous monitoring of time, temperature, and speed. Standard Operating Procedures Rotor Installation:
Adjustable from 1 to 99 minutes, with a momentary button for short "quick-spin" cycles .
18 or 24-place rotors for 1.5 mL / 2.0 mL microcentrifuge tubes Timer Range: 1 to 99 minutes, or continuous "Hold" mode