Press the button inside for approximately 10 to 15 seconds .
: Once the screen displays "Flash has been successfully completed," remove the USB drive and powercycle the unit one last time. Biamp Cornerstone Verification and Re-claiming
A factory reset rolls the device back to its factory-installed firmware or the last stable baseline partition. You will likely need to update the firmware immediately after the reset.
The three verified methods below outline how to reset an Evoko Liso based on its current state and responsiveness. Method 1: The MicroSD Card Flash (The Ultimate Reset) evoko liso factory reset verified
Authenticate using your organization's admin code.
Now that you have the verified reset USB drive, you can perform the reset on the Liso device itself.
A factory reset is the ultimate troubleshooting step to resolve persistent software glitches, connectivity drops, or configuration errors on your Evoko Liso room manager. This comprehensive guide outlines the verified, step-by-step methods to safely restore your device to its original out-of-the-box settings. Prerequisites Before Resetting Press the button inside for approximately 10 to 15 seconds
Performing a factory reset on an Evoko Liso is a straightforward process when you follow the verified USB method. By carefully preparing your tools and following each step, you can resolve persistent software issues, clear out old configurations, and get your meeting room system back on track. If you encounter difficulties at any stage, refer to the troubleshooting section or contact Biamp Technical Support for further assistance.
Click on (or Disconnect/Unbind and Reset depending on your Evoko Home software version).
Insert the prepared USB drive into the on the back of the device. You will likely need to update the firmware
Before initiating the reset, ensure you have the following ready: You must be standing at the device.
The process is broken down into two distinct phases: creating the reset drive, and then using it to reset the Liso.