Fanuc Series Oitf Plus Programming Manual

A robust program begins with safe startup blocks to ensure the machine starts in a known state. Essential Startup Codes Metric (mm) or Inch input.

: Traditionally, programs are named with an "O" followed by a four-digit number (e.g., O1234 ). The Plus series is the first in its class to support 32-character alphanumeric names , allowing for more descriptive file management (e.g., FLANGE_REV_A_OP10 ).

Spindle Forward (Clockwise when looking from tailstock to spindle). M04: Spindle Reverse (Counter-Clockwise). M05: Spindle Stop. M08: Coolant On. M09: Coolant Off. M30: End of Program and Reset to Beginning. 7. Cutter Radius Compensation (G41 / G42)

This guide breaks down the essential programming elements from the official manuals to help you master the 0i-TF Plus. 1. Traditional G-Code vs. MANUAL GUIDE i fanuc series oitf plus programming manual

Up to 4 axes can be controlled simultaneously per path. Program Management and Editing

The is the latest evolution in the 0i-Series CNC controls, specifically optimized for high-precision turning and lathe operations. The programming manual (typically reference B-64694EN ) covers everything from basic ISO G-code to advanced conversational programming through MANUAL GUIDE i . Core Programming Features

Writing code that runs flawlessly requires adherence to rigorous safety standards and efficiency protocols. A robust program begins with safe startup blocks

| G Code | Group | Function | Modal | |--------|-------|------------------------------------|-------| | G00 | 01 | Positioning (Rapid Traverse) | Yes | | G01 | 01 | Linear Interpolation (Feed) | Yes | | G02 | 01 | Circular Interpolation (CW) | Yes | | G03 | 01 | Circular Interpolation (CCW) | Yes | | G04 | 00 | Dwell (P or X/U address) | No | | G10 | 00 | Programmable Data Input | No | | G18 | 16 | Xp-Zp Plane Selection (Default) | Yes | | G20 | 06 | Inch Input Mode | Yes | | G21 | 06 | Metric Input Mode | Yes | | G32 | 01 | Thread Cutting | Yes | | G40 | 07 | Cutter Compensation Cancel | Yes | | G41 | 07 | Cutter Compensation Left | Yes | | G42 | 07 | Cutter Compensation Right | Yes | | G50 | 00 | Coordinate System Setting | No | | G70 | 00 | Finishing Cycle | No | | G71 | 00 | Stock Removal in Turning (Type I/II)| No | | G72 | 00 | Stock Removal in Facing | No | | G76 | 00 | Multiple Threading Cycle | No | | G83 | 09 | Deep Hole Peck Drilling (Z-axis) | No | | G96 | 13 | Constant Surface Speed Control ON | Yes | | G97 | 13 | Constant Surface Speed Control OFF | Yes | | G98 | 05 | Feed per Minute (mm/min) | Yes | | G99 | 05 | Feed per Revolution (mm/rev) | Yes |

O2000; #1 = 50.0; (Start X diameter) #2 = 10.0; (Groove width Z) #3 = 0.2; (Incremental step) WHILE [#1 GT 30.0] DO1; G00 X#1 Z5.0; G01 Z-#2 F0.05; G00 Z5.0; #1 = #1 - #3; END1; M99;

: Aligns parallel with the machine spindle centerline. The Plus series is the first in its

This excerpt is for training and reference only. For full details, refer to the official FANUC Series Oi-TF Plus manual B-64604EN.

A major focus of the programming manual is the detailed explanation of FANUC‘s fixed (canned) cycles for turning operations. These cycles dramatically simplify the programming of repetitive roughing, finishing, and grooving sequences. The manual provides extensive coverage of: