config router static edit 1 set gateway 192.168.1.1 set device port1 next end Use code with caution. ⚠️ Troubleshooting Common Issues
: If you need to move this firewall to a different hypervisor (like VMware or VirtualBox ), you can use qemu-img convert to change the format from .qcow2 to .vmdk or .raw .
Deeper Zero Trust Network Access features. fgtvm64kvmv721fbuild1254fortinetoutkvmqcow2 work
: The .qcow2 image is placed in a storage pool, often at /var/lib/libvirt/images .
config system interface edit port1 set mode static set ip 192.168.1.99 255.255.255.0 set allowaccess ping https ssh http end config router static edit 1 set gateway 192
Execute the following CLI block to spin up the instance with a primary boot drive and an empty logging disk:
config system interface edit port1 set mode static set ip 192.168.122.100 255.255.255.0 set allowaccess ping https ssh http next end config system route edit 1 set gateway 192.168.122.1 set device port1 next end Use code with caution. Upload the QCOW2 image directly into the GNS3 VM storage
Select your exact version () or modify a version line to reference FGT_VM64_KVM-v7.2.1.F-build1254-FORTINET.out.kvm.qcow2 . Upload the QCOW2 image directly into the GNS3 VM storage. For EVE-NG Setup
Once the VM powers on, access the console to set up basic connectivity:
Working with FortiGate VM: A Technical Guide to fgtvm64kvmv721fbuild1254fortinetoutkvmqcow2
When provisioning directly through the Linux CLI using libvirt , use the following virt-install template to map the required interfaces and dual disks correctly: