Manual-adast-maxima-mh-80-2 Jun 2026

Setting the depth of the new blade against the cutting stick to ensure a clean bottom-sheet slice without cutting too deeply into the plastic stick material. Troubleshooting Common Faults

A key safety feature is the positive mechanical locking of the knife in the top dead position (TDC) to prevent accidental drops.

A dull knife leads to jagged edges and puts unnecessary stress on the hydraulic system. The manual provides a strict procedure for safely changing the blade.

: Rotate or swap out the plastic cutting stick. If the issue remains, remove the knife and have it professionally sharpened or replace it with a fresh backup blade. Issue 2: Clamp Descends, But Knife Will Not Cut Manual-adast-maxima-mh-80-2

The Adast Maxima MH 80-2 press brake offers several advantages and benefits to users:

Ensure that the machine only cuts when both buttons are pressed simultaneously. Cutting Procedure

: Typically includes an air-cushion table to move heavy paper stacks easily, hydraulic pressure clamping, and digital position displays on newer or upgraded versions. Blade Details Setting the depth of the new blade against

The third essential component is the . The Adast Maxima is a machine of iron and oil. The manual provides a detailed schedule: daily oiling of the cam followers, weekly greasing of the transfer cylinder joints, and monthly cleaning of the water circulation system. It specifies exact viscosities for the central lubrication system and warns against using detergents that could damage the rubber blanket cylinders.

Features multi-layered safety mechanisms, including photo-cell light curtains and two-handed operation controls. 2. Key Components and Technical Data

For print shop managers considering this machine, the specifications tell a story of capability and durability: The manual provides a strict procedure for safely

Regularly check hydraulic oil levels and change it according to the maintenance manual to ensure smooth hydraulic operation.

Verify electrical safety barriers and trace the electromechanical clutch line. 4. Modernizing and Sourcing Manual Data

Dull knives lead to poor cutting quality and increased load on the motor. Keep a sharp spare knife ready.

Ensure the light curtains and safety locks are tested daily. Conclusion