Mikrotik L2tp Server Setup Full |top| -

Here is a consolidated script. Replace YOUR_WAN_IP , MySuperSecretKey123 , and john / securepassword123 accordingly.

/ip firewall nat add chain=srcnat src-address=192.168.100.0/24 action=masquerade out-interface-list=WAN

To allow a user to access the LAN and internet, no additional routes are needed if your local LAN subnet is reachable from the VPN pool. mikrotik l2tp server setup full

For new deployments, consider modern, more efficient protocols like WireGuard (available in RouterOS v7) or IKEv2/IPsec . They offer better performance, state-of-the-art cryptography, and simpler configurations.

/ip ipsec proposal add name=vpn-proposal auth-algorithms=sha256 enc-algorithms=aes-256-cbc lifetime=8h pfs-group=modp2048 Here is a consolidated script

/interface l2tp-server server set enabled=yes default-profile=l2tp-profile authentication=mschap2 max-mtu=1400 max-mru=1400 interface=ether1

Setting up an L2TP/IPsec VPN server on a MikroTik router provides a secure, reliable, and universally compatible way to access your home or office network remotely. By following the steps outlined in this guide, you can have a robust VPN up and running. Remember to always use strong passwords and Pre-Shared Keys, and keep your RouterOS version up-to-date for the latest security patches and features. By following the steps outlined in this guide,

: Enter a strong pre-shared key (e.g., SuperSecretIPsecKey ). Remote clients will need this key to connect. Click OK . 🔒 Step 5: Configure the Firewall Rules

Go to > VPN > Add VPN Configuration > L2TP over IPsec .

When clients connect, they need an IP address from your router. We will create a dedicated IP pool for VPN users. Open WinBox, go to > Pool . Click + to add a new pool. Name: l2tp-pool .