The phone rebooted automatically. First boot took 5–7 minutes. Then — the setup screen. His Nokia TA-1165 was alive again.
: Flashing will erase all data; back up your files if the phone still boots. Installation Steps
Open the extracted folder and look for the ResearchDownload.exe or UpgradeDownload.exe file.
(Windows 10/11):
Download the official ROM package specifically matching the TA-1165 model variant.
Open on your Windows PC. Look under the Ports (COM & LPT) section. It must display Qualcomm HS-USB QDLoader 9008 (COMx) . If it shows an error triangle or "Unknown Device," reinstall your drivers. Step 3: Flash Firmware via QFIL (QPST Tool)
. This process is typically used to fix "Hang on Logo" issues, remove screen locks, or repair a dead boot. Prerequisites Before starting, ensure you have the following: PAC Firmware File : The specific flash file for the Nokia TA-1165 SPD Flash Tool : Tools such as the SPD Upgrade Tool (ResearchDownload) or professional boxes like UMT SPD Tool Pandora Box Cheetah Tool SPD USB Drivers nokia ta1165 firmware pac file install
This indicates a connection issue. Try installing the drivers again, switching to a different USB port (preferably a USB 2.0 port on the back of the PC), or using a different USB cable.
Verify the connection in the Windows . It should appear under "Ports" as Qualcomm HS-USB QDLoader 9008 or Android Bootloader Interface . Step 4: Begin the Firmware Installation
Nokia c1 how to flash | Nokia ta-1165 flash with pandora box The phone rebooted automatically
Download QFIL (Qualcomm Flash Image Loader) , which is bundled inside the QPST Tool suite, or the Nokia Online Service Tool (OST) .
firmware file you extracted earlier. Wait for it to load completely. Configure Flashing Play (Start Downloading) button in the tool. Connect Device Power off your Nokia TA-1165 Volume Down