Every vessel equipped with an ODME S3000 is legally required to carry a physical copy of the certified instruction manual on board. Look in the Cargo Control Room (CCR) or the Chief Engineer's office.
Input the current vessel speed and total cargo volume into the CCU if the automatic GPS/log feed is offline. Starting the Discharge Process
Before operating the ODME S3000, ensure the system logs are clear, sensors are calibrated, and the fresh water flushing line is available. Pre-Operational Checklist odme s3000 manual pdf
Total Oil Limit Set (Calculated from cargo quantity). Key 8: Discharge Condition (Clean ballast or Slops). 3. Calibration and Maintenance
The ODME S3000 is a modular system distributed across the safe zone (Engine Room) and the hazardous zone (Pump Room). Understanding these components is essential for effective maintenance. Main Control Computer (MCU) Every vessel equipped with an ODME S3000 is
: Regular "Across Running," "Back Flushing," and "Calibration" tests must be performed in Standby Mode with fresh water supplied to prevent the pump from running dry.
Before operation, the manual specifies several manual checks: S-3000 – Oil Discharge Monitoring Equipment Starting the Discharge Process Before operating the ODME
The is an advanced oil content monitoring system developed to comply with IMO Resolution MEPC.108(49). It monitors the discharge of ballast or tank washing water, ensuring the concentration of oil does not exceed regulated limits ( ), and stops the discharge if it does. Key Components of the S-3000 System:
The search for an is critical for any ship operator or engineer. The official manual is the authoritative source for all technical specifications, operating procedures, maintenance schedules, and troubleshooting guides. The manual is an integral part of the vessel's International Oil Pollution Prevention (IOPP) certificate documentation and must be available onboard for inspection. It is the primary reference used by manufacturers' service engineers during calibrations and repairs.
: Circulates the sample water through the OCM and ensures a homogeneous mixture via a built-in conditioning pump.