Before diving into the resetter tool, you need to understand why your Canon G2010 stops working.
While still holding the Stop button, press and hold the button. Keep holding the Power button, and release the Stop button.
| Error Code / Symptom | What It Means | | :--- | :--- | | | The printer has detected that the waste ink absorber (the internal ink pad) is nearly or completely full. | | Error Code: 1700 | An early warning that the waste ink absorber is approaching capacity. | | Error Code: P07 / E08 | Often related to a general waste ink tank overflow condition or absorption saturation issue. | | "Ink Absorber Full" Warning | A visible message on your computer screen via the Canon Status Monitor, explicitly stating the maintenance cartridge needs attention. | resetter printer canon g2010
The Ultimate Guide to Resetting the Canon Pixma G2010 Printer
After testing multiple tools, here are the most reliable: Before diving into the resetter tool, you need
If you reset the software counter without replacing or cleaning the physical pads, the waste ink will eventually overflow. This can cause permanent stains on your desk or short-circuit the internal electronics of the printer.
Ensure you are using a compatible version of the Service Tool. Using outdated versions (like v3400) on newer G-series models can permanently lock or damage the printer’s mainboard IC chip. | Error Code / Symptom | What It
Look at the top section of the tool. It should display your active USB connection port. If the options are grayed out, your printer is not in Service Mode or the USB connection is loose.
To clear the counter chip digitally, you need a Service Tool utility app. The most reliable version for the Canon G-series, including the G2010, is (or higher, such as V5302). Safety Warnings Regarding Free Software:
, many users successfully use these "resetter" steps at home. ij.manual.canon How to Manually Reset Canon G2010
This error occurs when the internal waste ink pads are digitally "full." You can often bypass this manually without external software. Enter Service Mode Turn off the printer but keep it plugged in. Press and hold the (triangle) button. While holding Stop, press and hold the Release the button (keep holding Power). (some guides suggest 6). Release the