Sc67310 Ricoh Error Extra Quality !link! -

After IPU replacement, print a (SP2-194-001) and calibrate using the scanner or a spectrophotometer (if equipped) to restore "extra quality" mode.

Use a high-quality surge protector or UPS (Uninterruptible Power Supply) to prevent minor power fluctuations that could trigger the controller failure. Conclusion

The connection between the main controller (the printer engine) and the smart operation panel (the Android-based screen) has failed or timed out. sc67310 ricoh error extra quality

The Smart Operation Panel setting (SP5-748-201) is not activated or configured correctly.

Ricoh frequently releases panel firmware (specifically for the Android or Linux-based UI) separately from the system firmware. If a technician updates the controller but not the panel’s Brick ROPM (Resident Object Program Memory), the handshake code versions will mismatch. The error appears immediately after a firmware update. Print an SMC report (if possible) or check the panel’s built-in diagnostic mode (usually holding down "Check Status" + "Stop" during boot). After IPU replacement, print a (SP2-194-001) and calibrate

Communication error between the controller and the operation panel at startup or during operation.

: Acts as the brain, processing print jobs, network data, and user interface commands. The Smart Operation Panel setting (SP5-748-201) is not

: Enter Service Mode, navigate to SP-5-810 (SC Reset), click Execute , and restart the machine using the physical power rocker switch.

After IPU replacement, print a (SP2-194-001) and calibrate using the scanner or a spectrophotometer (if equipped) to restore "extra quality" mode.

Use a high-quality surge protector or UPS (Uninterruptible Power Supply) to prevent minor power fluctuations that could trigger the controller failure. Conclusion

The connection between the main controller (the printer engine) and the smart operation panel (the Android-based screen) has failed or timed out.

The Smart Operation Panel setting (SP5-748-201) is not activated or configured correctly.

Ricoh frequently releases panel firmware (specifically for the Android or Linux-based UI) separately from the system firmware. If a technician updates the controller but not the panel’s Brick ROPM (Resident Object Program Memory), the handshake code versions will mismatch. The error appears immediately after a firmware update. Print an SMC report (if possible) or check the panel’s built-in diagnostic mode (usually holding down "Check Status" + "Stop" during boot).

Communication error between the controller and the operation panel at startup or during operation.

: Acts as the brain, processing print jobs, network data, and user interface commands.

: Enter Service Mode, navigate to SP-5-810 (SC Reset), click Execute , and restart the machine using the physical power rocker switch.