Traice Dvr Password Reset Jun 2026

If your Traice DVR is connected to a local network (LAN), you can bypass the local monitor entirely using desktop software or mobile applications. Reset via Mobile App:

Leave the battery out for . This drains the volatile memory (NVRAM) storing the system clock.

Method 3: Hard Reset via Physical Motherboard Button (Jumper)

Before attempting complex software resets or opening the physical chassis, you should verify if the recorder is still using factory defaults. Many installers do not alter the root credentials during setup. Try the following user and password combinations directly on the local login screen: admin | Password: (Leave completely blank) Username: admin | Password: 123456 Username: admin | Password: 1234 Username: admin | Password: 000000 Username: admin | Password: admin Phase 2: The Date-Based Master Password Generator Method traice dvr password reset

Enter the exact date displayed on your DVR into the generator.

To help me provide a more accurate solution, could you tell me:

What are printed on the silver barcode sticker on the bottom of the device? Share public link If your Traice DVR is connected to a

Hold the button for 10–20 seconds until you hear a beep or see the system reboot.

Many DVRs have a built-in physical reset button, often found on the back, side, or bottom of the unit. This is often the quickest way to wipe the password and return the device to its factory settings. Here’s how to use it:

Like many embedded Linux DVR systems, older Traice firmware models use an internal clock algorithm to generate temporary "Super Passwords." These master codes change every 24 hours based on the date displayed on the monitor screen. Step 1: Note the Exact DVR Date Method 3: Hard Reset via Physical Motherboard Button

While holding the bridge, plug the power cable back into the DVR.

Answer the pre-configured questions exactly as you did during initial setup. Create and confirm a brand-new master password.

If successful, the system will prompt you to create a new password. 4. Hardware Reset (Reset Button)

While the DVR is turned , place a metal screwdriver tip or a jumper cap across both pins to bridge the connection.