Software In Tenda D305 | Update

If your internet does not work immediately after the update, try these quick fixes: The Router Reset to Factory Settings

Before updating the software in your TENDA D305 router, make sure to:

The Tenda D305 is a mature model. If Tenda stops releasing new firmware for this device, your router will no longer receive security updates. At that point, the safest course of action is to replace the D305 with a newer router model that is still actively supported by the manufacturer. Continuing to use an unsupported router on the internet exposes your entire home network to known vulnerabilities that will never be patched. Update Software in TENDA D305

Verify that the hardware version of the firmware matches the hardware version printed on the sticker at the bottom of your router (e.g., V1 or V2). Installing firmware for the wrong hardware version will break the device.

If you cannot access 192.168.1.1 after the update, your computer may still be holding onto an old network cache. Unplug your Ethernet cable, plug it back in, or restart your computer. You can also try clearing your browser cache or opening the page in an Incognito/Private window. The Upgrade Failed midway If your internet does not work immediately after

The router will automatically reboot once the installation is complete.

To install the software, you must log into the router's local setup wizard. Open your web browser (Chrome, Edge, Firefox, or Safari). Continuing to use an unsupported router on the

: Upgrading software may restore your router to its factory default settings. Export your current configuration file first so you can restore your internet settings later.

Ensure you did not accidentally download firmware meant for a different Tenda model (like the D301 or F3). What to Do If the Router Gets Bricked

In short, keeping your router's firmware up to date ensures you get the best, safest, and most reliable performance out of your TENDA D305.

The entire process typically takes 2–4 minutes. During this time, do not touch any buttons , do not close the browser , and do not power off the router . The screen will show a progress indicator. Once finished, the router will restart. After the reboot, log back into the web interface and navigate to System Settings > System Status to confirm that the firmware version has updated successfully.