Usb Device Id Vid 0951 Pid 1666 Link

Supports USB 3.2 Gen 1 (also known as USB 3.0/3.1), with read speeds typically reaching up to 100–200 MB/s depending on the specific model and capacity. Drivers and Troubleshooting

Direct search for DT100 G3: https://www.kingston.com/en/usb-flash-drives/datatraveler-100-g3

Search for the dedicated production tool corresponding to your controller (e.g., Phison MPParamEdit / ST-TOOL or SMI MPTool ). usb device id vid 0951 pid 1666 link

Execute clean to clear all partition structures, configuration parameters, and lingering flags.

Check lsusb – you should see Bus XXX Device XXX: ID 0951:1666 Kingston Technology . If seen but not mounted, run: Supports USB 3

The corresponds directly to the popular family of Kingston DataTraveler USB 3.0 flash drives Go to product viewer dialog for this item.

: Refers to a range of Kingston USB 3.0/3.1 Gen 1 mass storage devices. Check lsusb – you should see Bus XXX

Ranging from 40 MB/s to 180 MB/s depending on whether the drive is running through a modern USB 3.0 port or fallback USB 2.0 speeds.

Multi-level flash memory architecture, frequently pairing the Phison controller with Hynix or Toshiba TLC (Triple-Level Cell) flash dies.

You can find documentation and basic troubleshooting on the official Kingston Support page.