This is the "hidden" step many miss. There are often two or three bolts accessible from the engine bay/plenum chamber (near the wiper motor area) that secure the dashboard to the firewall.

Pull off the heater control knobs. Some models hide screws directly behind these dials; others feature hidden screws right beneath the plastic fascia plate surrounding the dials. Pop the fascia off to inspect.

Zanim w ogóle dotkniesz śrub mocujących główny kokpit, musisz usunąć wszystkie elementy znajdujące się na drodze:

: Pull the cluster toward you, tilt it, and unclip the multi-pin electrical connector at the back. 3. Center Console & Radio

Remove the shift boot surround. Locate the plastic expansion rivets and screws along the footwells on both the driver and passenger sides. Slide the lower center console backward and out of the cabin. Step 3: Remove the Instrument Cluster and Trim Pieces

Use zip ties to secure any loose wiring to prevent new rattles.

Removing the dashboard from your VW Polo 6N requires patience and attention to detail. Here's a step-by-step guide to help you through the process:

If you want this tailored into a printable checklist, step-by-step with photos, or a shorter quick-reference version, say which format you prefer.

The VW Polo 6N dashboard is held by structural screws inside the cabin and critical bolts accessed from the engine bay plenum chamber. Cabin Structural Screws

Remove the two Torx screws located on the upper underside of the instrument cluster cowl. Pull the trim bezel forward.

Updated - Vw Polo 6n Dashboard Removal