Xnx Universal Transmitter Quick Start Guide

: Tap [ ▶ ] to confirm options or [ ◀ ] to go back. Key Settings

Connect a dedicated ground wire to either the internal or external earth ground lug using a minimum 12 AWG (4 mm²) wire to ensure proper electromagnetic compatibility (EMC) and safety shielding. 2. Power and 4-20mA Output (Standard Block)

Secure the housing to the wall or mounting plate using appropriate M8 or 5/16-inch bolts. Xnx Universal Transmitter Quick Start Guide

: Mount the unit with the sensor pointing downwards to prevent water accumulation and dust build-up.

Scrolls through menus or adjusts numerical values. Escape (✖): Exits the current menu or cancels an action. : Tap [ ▶ ] to confirm options or [ ◀ ] to go back

Purge the sensor with clean air before returning the unit to online status. Troubleshooting Fault and Alarm Codes

Do you require communication protocols?

Once wired, apply 24V DC power. The XNX will undergo a self-test routine: The display will cycle through initialization screens.

Before installation, verify the site classification and hazardous area certifications. Ensure all power sources are locked out to prevent electrical shock or accidental ignition in classified areas. Required Tools Hex keys (M5 and M25/M20 locking pins) Flat-head screwdriver (terminal block connections) Open-ended wrench for cable glands Digital multimeter (DMM) Mechanical Installation Power and 4-20mA Output (Standard Block) Secure the