Xy-w58cdt9-av7 Manual Jun 2026

| Parameter | Value (Typical for XY-W58CDT9-AV7) | |--------------------------|------------------------------------------------| | Supply voltage | DC 7V to 32V (or AC 7V to 30V depending) | | Power consumption | < 1W (idle), < 2W (relay active) | | Relay contact rating | 10A @ 250V AC / 10A @ 30V DC | | Time range | 0.1 seconds to 999 minutes (depends on base) | | Accuracy | ± 2% of set time (typical) | | Trigger input | Active high (3-30V) / Active low (0-0.8V) | | Operating temperature | -20°C to +60°C | | Dimensions (PCB) | Approx. 60mm x 45mm x 18mm |

: These boards are often "plug-and-play" but may require firmware updates for specific panel resolutions.

: Before applying power, verify the panel operating voltage (typically 3.3V, 5V, or 12V). Ensure the on-board hardware jumper is shifted to match the panel datasheet requirements. 3. Integrated Backlight Driver xy-w58cdt9-av7 manual

Attach a standard garden hose or the provided wide-diameter PVC drain line.

Tip: Most users prefer P1 (delayed start) or P4/P5 (cycling/blinking). | Parameter | Value (Typical for XY-W58CDT9-AV7) |

The board is typically controlled via a separate button pad with the following standard functions: Accesses the On-Screen Display (OSD) settings. Input/Source: Switches between HDMI and VGA signals. Up/Down/Left/Right: Navigation within the OSD menu and volume control. Auto Adjust (Down Key):

Usually supports a wide range, typically 6V - 30V DC. Ensure the on-board hardware jumper is shifted to

Handle the board by the edges to avoid electrostatic discharge (ESD) that can damage delicate chips.

: Use a 12V 3A DC power adapter. Warning : Do not exceed 12V, as this may permanently damage the board. Features and Improvements

Someone will likely recognize the board or provide the correct manual.

Barrel jack (usually 5.5mm x 2.1mm center-positive) or an onboard 4-pin wafer connector.